Voron popular 2.4 r2 functional printed parts

Voron 2.4 r2 esential parts to build the printer, in ABS+

All the functional printed parts to build a Voron 2.4 r2 (as per the Voron Print It Forward program, but without waiting months). Made in ABS+ from Esun, Progressive3D (red/black) and/or X3D (red/black). All the parts are printed following the Voron 2.4 manual, i.e. 0.2mm layers, 4 walls, 5 layers for top/bottom, 40% infill (cubic or gyroid).

The default colour for the main parts is black and you can choose the accent colour from:
Yellow, Light Blue, Red, White, Grey, Gold, Blue, Peak Green, Brown, Pine Green, Silver, Orange, Purple, Pink (see colours in picture and Progressive3D/X3D websites).

On request, I can print the main parts in a different colour than black. That would add 3-5 days to the order. The main colours available are the same ones listed for the accents, but their immediate availability depends on the requests volume. I normally have at least one spool available for each listed colour, but please ask before ordering.

When you order please specify your:
-PSU (in case it is not the standard LRS, i.e. you have a popular UHP)
-MCU (Spider, Octopus, Duet, SKR, etc.)
-Power inlet (in case it is not the standard filtered one)
-Hotend (V6, Dragon, Dragonlfy BMO/BMS, Revo Micro, Revo Dragon, Mosquito or Nova)
-If you use the standard wiring or a toolhead PCB (i.e. Hartk afterburner toolhead PCB)
-If you use the standard switches for the endstops or magnets instead (Hall effect)
as the brackets/mounts/parts are different for each.
-If you purchased a kit please let me know which one you have.
Please note that the mounting brackets for the electronics (PSU, RaspberryPi, MCU, Wagos) are usually black but could be in other colours as they are not visible anyway. Also, the standard for Vorons V2 now is direct drive. If you want parts for a bowden setup, please let me know.

All the parts are printed on Voron printers, with the highest quality and best tolerances.